View Thread | Post Response | Return to Index | Read Prev Msg | Read Next Msg

Re: 77 fiberform 19 ft cuddy

Posted By: Long Island Marine Survyor <neboaters@aol.com>
Date: Thursday, 22 October 2009, at 8:58 a.m.

In Response To: 77 fiberform 19 ft cuddy (mickey martin)

The bilge pump kit comes with a wiring diagram. The wires go to a switch at the helm, that switch turns them on manually. Another switch is the automatically operated float switch. That is a float that goes in the bilge next to the pump. So power supply from the both switches when activated turns the pump on.

Messages In This Thread

• 77 fiberform 19 ft cuddy mickey martin -- Thursday, 15 October 2009, at 11:46 a.m.
  • Re: 77 fiberform 19 ft cuddy Long Island Marine Survyor -- Thursday, 22 October 2009, at 8:58 a.m.

 

Post Response
Your Name:
E-Mail Address:
Subject:
Message:
Enter Verification Code HT4K:

 

View Thread | Post Response | Return to Index | Read Prev Msg | Read Next Msg

This Ask Surveyor Forum is maintained by an Administrator with WebBBS 4.10.