View Thread | Post Response | Return to Index | Read Prev Msg | Read Next Msg

Re: Stainless or bronze on HA 18

Posted By: Kevin <kcdonohue@gmail.com>
Date: Thursday, 5 November 2009, at 11:31 p.m.

In Response To: Stainless or bronze on HA 18 (Kevin)

no, this is a metal piece about three feet long that attaches to the skeg and holds the bottom pin of the rudder. it is cast bronze but very corroded. not the two pintels. those need replacing should be easier.

Messages In This Thread

• Stainless or bronze on HA 18 Kevin -- Thursday, 5 November 2009, at 7:21 a.m.
  • Re: Stainless or bronze on HA 18 Greg -- Thursday, 5 November 2009, at 12:52 p.m.
    • Re: Stainless or bronze on HA 18 Greg -- Thursday, 5 November 2009, at 12:53 p.m.
  • Re: Stainless or bronze on HA 18 Don southwick -- Thursday, 5 November 2009, at 12:59 p.m.
  • Re: Stainless or bronze on HA 18 Kevin -- Thursday, 5 November 2009, at 11:31 p.m.
    • Re: Stainless or bronze on HA 18 Greg -- Friday, 6 November 2009, at 12:49 p.m.
  • Re: Stainless or bronze on HA 18 Kevin O'Driscoll -- Tuesday, 17 November 2009, at 11:39 a.m.

 

Post Response
Your Name:
E-Mail Address:
Subject:
Message:
Enter Verification Code HT4K:

 

View Thread | Post Response | Return to Index | Read Prev Msg | Read Next Msg

This Cat Boat Forum is maintained by an Administrator with WebBBS 4.10.