View Thread | Post Response | Return to Index | Read Prev Msg | Read Next Msg

Re: Stainless or bronze on HA 18

Posted By: Greg <gbmiller751@comcast.net>
Date: Friday, 6 November 2009, at 12:49 p.m.

In Response To: Re: Stainless or bronze on HA 18 (Kevin)

Kevin, I understand the location and part now. Thanks. I think Don had the answer to my worries about corrosion with stainless steel, personally, I would use bronze. You have to hope the fiberglass is healthy along the skeg when you replace it. Good luck!

Messages In This Thread

• Stainless or bronze on HA 18 Kevin -- Thursday, 5 November 2009, at 7:21 a.m.
  • Re: Stainless or bronze on HA 18 Greg -- Thursday, 5 November 2009, at 12:52 p.m.
    • Re: Stainless or bronze on HA 18 Greg -- Thursday, 5 November 2009, at 12:53 p.m.
  • Re: Stainless or bronze on HA 18 Don southwick -- Thursday, 5 November 2009, at 12:59 p.m.
  • Re: Stainless or bronze on HA 18 Kevin -- Thursday, 5 November 2009, at 11:31 p.m.
    • Re: Stainless or bronze on HA 18 Greg -- Friday, 6 November 2009, at 12:49 p.m.
  • Re: Stainless or bronze on HA 18 Kevin O'Driscoll -- Tuesday, 17 November 2009, at 11:39 a.m.

 

Post Response
Your Name:
E-Mail Address:
Subject:
Message:
Enter Verification Code HT4K:

 

View Thread | Post Response | Return to Index | Read Prev Msg | Read Next Msg

This Cat Boat Forum is maintained by an Administrator with WebBBS 4.10.